Operating Instructions - RD WORKS FP201R Owner's Manual

PREPARATION
Place the heater on a firm, level surface and plug into a 120V 60Hz power outlet.
Caution: The rear of the heater should be at least 4 inch away from the wall.
Please pull the insulating film out of battery cover before using the remote control.
Remote control

OPERATING INSTRUCTIONS

1. First turn on the Power switch on the right side of the heater. The Power switch supplies power to all
the function of the fireplace. This switch must be in
remote control to work.
Remote control
Power button: Powers the heater on and off.
Timer button: User setting timing boot or shutdown.
Heater button: Set up the heater mode and turn off the heat.
Flame button: Turn on/off the flame and adjust the brightness.
Insulating film
PULL
6
Battery cover
"I"
position for any functions including the