RD WORKS FP201R Owner's Manual page 7

2.Setting timer-power-off
Caution! ONLY under power-on mode can you set timer-power-off function.
Or
0
2.Setting timer-power-on
Caution! ONLY under standby mode can you set timer-power-on function.
Or
0
Press the Power button on the remote control, the heat and flame
effect will be on. Press the Power button again, heat and flame
effect will be off immediately (but the fan will prolong working for
30 seconds), and then the heater goes into a standby mode.
When the unit is power on, press the Timer button to set timer-
power-off function (through the control panel or remote control).
Under power-on, the timer light demonstrates the timer-power-
off mode. Press the Timer button more than once, the time value
will vary through the path 0-1h-2h-4h-8h-0 in circulation.
The corresponding light is on when timer –power-off is set.
Under standby mode, press the Timer button to set timer-
power-on function (through control panel or remote
control).
Under standby, timer light demonstrates the timer-power-
on mode. Press the Timer button more than once, the
time value will vary through the path 0-1h-2h-4h-8h-0 in
circulation.
7