Safety Precautions - Vtron Digicom AP Series User Manual

Safety Precautions

Please read carefully and make sure to comply with the following terms and
conditions before operating VTRON Digicom AP series multi-screen processor:
●
Grounding wire
(connected to ground)
prohibited
User manual for Digicom AP series multi-screen processor
Ensure proper grounding (grounded as indicated
in the figure)
This product must be properly grounded to avoid dangers to
personal safety or any other harmful effects. Improper
grounding may cause severe system failure, unstable or
unreliable system
breakdown of the equipment.
Illegal change to the original design is
Any adding or deletion to any mechanical part or electric
circuit of this product is prohibited. Otherwise, VTRON will
not assume any liability for the results thus caused.
Prohibit the illegal installation of software
VTRON Digicom multi-screen processor is dedicated
image controlling device, and shall not be used for other
purposes. The customer shall consult VTRON or the
designated agent for the installation of their own
components. Otherwise VTRON will not assume any
liability for the results thus caused.
Be sure to cut off the power supply
Be sure to cut off the system power before conducting the
following operations.
A. Removal or reinstallation of any parts of the
product (except for the hot-pluggable parts)
B. Disconnection or reconnection of any electric
connector or other connectors of this product
ii
- -
!
operation, or even unrecoverable