Daily Maintenance; Environment And Cleaning - Vtron Digicom AP Series User Manual

5. Daily maintenance

5.1 Environment and cleaning

Note: The equipment does not need any internal adjustment, and there is no user
serviceable component in the equipment. To replace any part or repair the equipment,
please contact the local authorized service center. We are prepared to provide prompt
service to you and help you solve the relevant problems.
Daily inspection and maintenance
The operating environment of the equipment shall be free of dust, dry and have
1)
good ventilation.
Operating temperature: 0 ºC - 40 ºC Relative humidity: 20% - 80%, no condensing
2)
Keep the equipment clean, and avoid using any rough or abrasive cleaning agent.
3)
Do not place anything in and above the ventilation hole and ventilation slot. Avoid
4)
spraying any liquid or chemicals on or near the equipment.
Equipment cleaning
Be sure to disconnect the power socket before cleaning the equipment.
1)
Avoid using any liquid or spray cleaning agent when cleaning the inside or outside
2)
of the equipment.
Avoid using the corrosive solution (e.g., chemical thinner, acetone, gasoline or
3)
other abrasive cleaning agent), because such solution will damage the equipment
appearance.
User manual for Digicom AP series multi-screen processor
- - 18