Shure ULXD User Manual page 5

Transmitters
⑨
① Power LED
• Green = unit is powered on
• Red = low battery or battery error (see Troubleshooting)
• Amber = power switch is disabled
② On/Off Switch
Powers the unit on or off
③ TA4M Input Jack
Connects to a 4-Pin Mini Connector (TA4F) microphone or instrument cable
④ LCD Display:
View menu screens and settings. Press any control button to activate the
backlight
⑤ Infrared (IR) Port
Align with the receiver IR port during an IR Sync for automated transmitter
programming
Home Screen
Receiver
① Receiver Information
Use > to rearrange the
UTILITIES HOME INFO
following information:
• Channel name
• Group
• Channel
• Frequency
② Gain Setting
0 to +60 dB, or Mute
③ Mic. Offset Indicator
Indicates the transmitter is set to a gain offset
value
① ② ③
④
⑤
⑥
⑦
⑧
1
④ Transmitter Settings
The following information cycles when a
transmitter is tuned to the receiver's frequency:
• Transmitter Type (ULXD1=Bodypack;
ULXD2=Handheld)
• Input Pad (Bodypack only)
• RF Power Level (
mW)
• Transmitter Lock Status (
Note:
-No TX-
connection between a receiver and transmitter
⑩
ULXD2 4-Way Menu Navigation Button
⑥ Menu Navigation Buttons
Use to navigate through parameter menus and change values.
Acts as a 'back' button to return to previous
menus or parameters without confirming a value
exit
change
Enters menu screens and confirms parameter
enter
changes
Use to scroll through menu screens and to change
▼▲
parameter values
⑦ Battery Compartment
Requires Shure SB900 rechargeable battery or 2 AA batteries.
⑧ AA Battery Adapter
Handheld: rotate and store in the battery compartment to use a Shure re-
chargeable battery pack
Bodypack: remove to accommodate a Shure rechargeable battery pack
⑨ Detachable Bodypack Antenna
For RF signal transmission
⑩ Integrated Antenna
For RF signal transmission
⑪ Microphone Cartridge
See Optional Accessories for a list of compatible cartridges
2 3 4
=1 mW; =10 mW;
Lo Nm Hi
=Menu; =Power)
M P
is displayed when there is no RF
⑥ ① ②
⑧ ⑦ ⑤ ④
6
5
⑤ Battery Runtime Indicator
Shure SB900 battery: runtime is displayed in
minutes remaining
AA Batteries: runtime is displayed with a 5-bar
indicator
⑥ TV Channel
=20
Displays the TV channel that contains the tuned
frequency
⑪
7