HPE FlexNetwork 5510 HI Series Fundamentals Configuration Manual page 71

Figure 23 Configuring custom attributes for the Telnet user
Verifying the configuration
1. Telnet to the switch, and enter the username test@bbb and password aabbcc to access the
switch. Verify that you have access to diagnostic commands.
<Switch> telnet 192.168.1.70
Trying 192.168.1.70 ...
Press CTRL+K to abort
Connected to 192.168.1.59 ...
******************************************************************************
* Copyright (c) 2010-2016 Hewlett Packard Enterprise Development LP
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
login: test@bbb
Password:
<Switch>?
User view commands:
ping
quit
ssh2
super
system-view
telnet
tracert
<Switch>
Ping function
Exit from current command view
Establish a secure shell client connection
Switch to a user role
Enter the System View
Establish a telnet connection
Tracert function
63
*
*
*