Do you have a question about the WG163 and is the answer not in the manual?
Questions and answers
kenneth jackson
February 22, 2025
my worx weed eater continuously feeds line out
1 comments:
Mr. Anderson
February 22, 2025
The Worx WG163 weed eater has an automatic line feed system. Each time the tool starts from rest, it advances about 0.25 inches of trimmer line. A 'clattering' noise indicates the line is being fed.
This answer is automatically generated
Lee Asenjo
March 29, 2025
can I use other accessories to change the head ?
1 comments:
Mr. Anderson
March 30, 2025
Yes, other accessories such as replacement head blades and spools can be used to change the head on the Worx WG163. For example, Eyoloty offers compatible polycarbonate replacement head blades and flexible replacement blades specifically listed for models including the WG163.
This answer is automatically generated
Francis Nassiet
April 12, 2025
demonter le porte bobine et la bobine du coupe bordure 165E
1 comments:
Mr. Anderson
April 12, 2025
To remove the spool holder and spool from the Worx WG163 trimmer:
1. Press the two side tabs on the spool cap to release it. 2. Remove the cap by pulling it away from the trimmer. 3. Take out the spool from the spool holder.
Need help?
Do you have a question about the WG163 and is the answer not in the manual?
Questions and answers
my worx weed eater continuously feeds line out
The Worx WG163 weed eater has an automatic line feed system. Each time the tool starts from rest, it advances about 0.25 inches of trimmer line. A 'clattering' noise indicates the line is being fed.
This answer is automatically generated
can I use other accessories to change the head ?
Yes, other accessories such as replacement head blades and spools can be used to change the head on the Worx WG163. For example, Eyoloty offers compatible polycarbonate replacement head blades and flexible replacement blades specifically listed for models including the WG163.
This answer is automatically generated
demonter le porte bobine et la bobine du coupe bordure 165E
To remove the spool holder and spool from the Worx WG163 trimmer:
1. Press the two side tabs on the spool cap to release it.
2. Remove the cap by pulling it away from the trimmer.
3. Take out the spool from the spool holder.
This gives access to replace or rewind the spool.
This answer is automatically generated