Messaging - Pantech P8000 User Manual

Holding a call
1. Tap Hold during a call.
2. Tap Hold to connect to another call.
Recording a call
1. Tap the menu key during a call.
2. Tap Record to start recording a call.
3. Tap to stop recording.
Note The voice won't be recorded if the memory is full. The voice will be
automatically recorded until the memory is full.
Adding a call
1. Tap Add call to make a call to another party during a call with a
party.
2. Enter the telephone number and tap Call.
Note The party is held when you make a call with another party.
Adding an incoming call
You can wait a call during a previous call.
1. Drag Accept to the right to answer the call.
2. Tap End to finish the call.
Adjusting the volume
1. Increase or decrease the volume during a call to adjust the
volume.
2. The screen returns to the normal view in a few seconds.
Using the headset button (Bluetooth)
1. Long press the headset button during a call to answer the call.
2. Long press again the headset button to end the call.
3. Short press the button to mute or un-mute the voice.

Messaging

Sending a new message
1. Tap Messaging > New message.
2. Enter the contact of the recipient using
the virtual keypad or the QWERTY
keypad.
3. Enter a message on the empty screen.
4. Tap Send to send the message or
Cancel to undo the message.
Deleting messages
1. Tap Messaging and press the menu key.
2. Tap Delete > Yes.
Using a quick text
1. Tap Messaging and press the menu key.
2. Tap Quick Text and tap one of texts.
3. Press the menu key.
4. Tap Send message.
21
Communication