Table of Contents
Advertisement
7. About Hardware
Table 7.1. Specification < AIO-121602LN-USB > < 2 / 2 >
Item
Digital I/O
Number of I/O Channels
I/O signal level
Counter
Number of channels
Counting system
Max. count
Number of external inputs
Number of external outputs
Frequency response
USB
Bus specification
USB transfer rate
Power supply
Common section
Connector
Number of terminals used at
the same time
Power consumption (Max.)
Operating condition *6
Physical dimensions (mm)
Weight
Attached cable length
*1 : A linearity error approximately 0.1% of full-range may occur when operated at 0ºC or 50ºC ambient temperature.
*2: The required time is indicated in the analog to digital translation of one channel. When AD of two or more channels
is converted, time of the a few minutes of the channel is necessary.
Conversion time = Number of conversion channelsx2µsec
*3: SPS = Samplings Per Second. The number of data that can be converted in one second is shown.
*4 : The USB transfer speed depends on the host PC environment used (OS and USB host controller).
*5 : As a USB hub is also counted as one device, you cannot just connect 127 USB terminals.
*6 :
To suppress the heating, ensure that there are spaces for ventilation (about 5cm) around this product.
88
16-bit input lines, 8-bit input/output lines, 16-bit output lines
(programmable)
TTL level (positive logic)
1channels
Up count
FFFFFFFFh (Binary data, 32bit)
TTL level : 2 (Gate/Up)ch,
Gate (High level), Up (Rising edge)
TTL level : 1ch,
Count match output (positive logic, pulse output)
5MHz (Max.)
USB Specification 2.0/1.1 standard
12Mbps (Full-speed), 480Mbps (High-speed) *4
Bus power
10 pin (screw-terminal) plug header x6
127 terminals (Max.) *5
5VDC 450mA
0 - 50°C, 10 - 90%RH (No condensation)
180(L) x 140(D) x 34(H) (No protrusions)
300g
USB Cable 1.8m
Specification
AIO-121602LN-USB, AIO-120802LN-USB
Advertisement
Table of Contents
