Table of Contents
Advertisement
(3) The measuring is begun after clicked the button of [Start], the conversion's information is displayed.
The sampling number within FIFO:
This specifies the number of conversion data values remaining in memory (that have not yet been
output). This is shown visually in the "Memory Image".
Sampling count for triggering event:
An event is triggered when the number of samples remaining in the FIFO reaches the specified
value.
Number of samples to load:
The number of output data values (samples) to load at each event.
The Measuring will stop when this error as follows.
Sampling clock error:
When the application is measuring with internal clock, sampling clock is too fast to process.
When the application is measuring with External clock, clock cycle is too fast. Moreover, noise is
being considered.
(4) The measuring is stopping after clicked the button of [Stop].
AIO-121602LN-USB, AIO-120802LN-USB
4. Application Development
53
Advertisement
Table of Contents
