Warranty Statement - RCA BRM300DV Instruction Manual

BRM300D
User awareness instructions should accompany
device when transferred to other users.
Do not use this device if the operational
requirements described herein are not met.
Operating Instructions: Transmit no more than the
rated duty factor of 50% of the time. To transmit
(talk), push the Push-To-Talk (PTT) button. To receive
calls, release the PTT button.
Transmitting 50% of the time or less is important
because this radio generates measurable RF energy
exposure only when transmitting (in terms of
measuring for standards compliance). Hold the
radio in a vertical position in front of face with
the microphone (and the other parts of the radio,
including the antenna) at least one inch (2.5 cm)
away from the nose. Keeping the radio at the
proper distance is important because RF exposures
decrease with distance from the antenna. Antenna
should be kept away from eyes.
When worn on the body, always place the radio
in a approved clip, holder, holster, case, or body
harness for this product.
Professional Digital Two-Way Mobile Radio Instruction Manual
TM
Copyright © 2015 RCA Communications Systems
Using approved body-worn accessories is important
because the use of or other manufacturer's non-
approved accessories may result in exposure levels,
which exceed the FCC's occupational/controlled
environment RF exposure limits.
If you are not using a body-worn accessory and are
not using the radio in the intended use position
in front of the face, then ensure the antenna and
the radio are kept at least one inch (2.5 cm) from
the body when transmitting. Keeping the radio
at the proper distance is important because RF
exposures decrease with increasing distance from
the antenna.
Use only RCA Communications Systems approved,
supplied or replacement antennas, batteries, and
accessories. Use of non-approved antennas,
batteries, and accessories may exceed the FCC RF
exposure guidelines.

WARRANTY STATEMENT

RCA Communications Systems warrants each new
radio product it supplies to be free from defects in
material and workmanship under normal use and
57