Initiating/Responding To Emergency Alarm; Exiting Emergency Mode; Public Address; Sending A Radio Check - RCA BRM300DV Instruction Manual

BRM300D
Initiating & Responding to Emergency
Alarm
1. To initiate an Emergency Alarm, press the
programmed Emergency button. The LED lights
up solid red.
2. The display shows Sending Alarm, which
alternates with your radio ID. Emergency icon
appears on the Home screen display. When an
Emergency Alarm acknowledgment is received,
an alert tone sounds and the display shows
Emergency Alarm Successful.
3. Depending on the setting selected, you
can press the [PTT] button. OR your radio's
microphone is automatically activated, allowing
you to communicate with the other radio
without pressing the [PTT] button.
4. To Respond to an Emergency Alarm, press any
button to stop all Emergency Alarm received
indications. Press [PTT] button to initiate a call
with the emergency initiating radio.
Professional Digital Two-Way Mobile Radio Instruction Manual
TM
Copyright © 2015 RCA Communications Systems

Exiting Emergency Mode

Your radio exits Emergency mode automatically
when any of the following occurs:
• Emergency Alarm acknowledgement is
received (for Emergency Alarm only)
• All retries to send the alarm have been
exhausted
• The Emergency Off button is pressed
• The [PTT] button is pressed
• Your radio is powered off
ADVANCED FEATURES

Public Address

Public Address (PA) is a pre-programmed option
that amplifies audio which is then broadcast
through an external speaker.
1. Press the programmed PA button to activate
the PA feature. The LCD shows PA.
2. Speak into the microphone while holding down
the [PTT] to initiate the broadcast. The LCD will
display PA ON. You can adjust the PA volume
via the volume control knob.
27