Turning Radio Tones/Alerts On Or Off - RCA BRM300DV Instruction Manual

BRM300D
This feature toggles between repeater and
talkaround (direct) mode. If you are using a
repeater and your repeater is not operating
or you are out of range, you can continue to
communicate with other radios within your group
through "Talkaround".
Press the programmed Repeater / Talkaround
button to toggle between talkaround and
repeater modes. OR -
1. Press [VK] to access the main menu.
2. Press [▲] or [▼] to navigate to Utilities and press
[VK] to select.
3. Press [▲] or [▼] to navigate to Radio Settings
and press [VK] to select.
4. Press [▲] or [▼] to navigate to Talkaround and
press [VK] to select or [P4] to cancel.
5. After confirmation, the display shows
"Talkaround On" OR "Talkaround Off"
6. Press or wait the presetting time to exit the
menu.
7. The Talkaround setting is retained even after
Professional Digital Two-Way Mobile Radio Instruction Manual
TM
Copyright © 2015 RCA Communications Systems
powering down.
Radio Tones/Alerts On or Off
You can enable and disable all radio tones and
alerts (except for the incoming Emergency alert
tone) if needed. Press the programmed All Tones/
Alerts button to toggle all tones on or off.
1. Press [VK] to access the main menu.
2. Press [▲] or [▼] to navigate to Utilities and press
[VK] to select.
3. Press [▲] or [▼] to navigate to Radio Settings
and press [VK] to select.
4. Press [▲] or [▼] to navigate to Tones / Alerts
and press [VK] to select.
5. Press [▲] or [▼] to navigate to All Tones and
press [VK] to select.
6. If the display shows Turn On press [VK] to
enable all tones and alerts and the display
shows All Tones On. If the display shows Turn
Off press [VK] to disable all tones and alerts and
49