Depth Offset; Speed Calibration - Humminbird HELIX 5 SONAR Operation Manual

NOTE: The availability of the digital readout information corresponds with the view selected and the
accessory attached.
Depth Offset will adjust the digital depth readout to indicate depth from the waterline or boats
keel. Enter a positive vertical measurement from the transducer to the waterline to read the depth
from the waterline. Enter a negative vertical measurement from the transducer to keel to read the
depth from the keel.
The available Depth Offset settings are determined by your Humminbird model as follows:
• HELIX 5: -10.0 to +10.0 feet or -3.0 to +3.0 meters; Default = 0.0, or Off
• HELIX 7: -10.0 to +10.0 feet or -3.0 to +3.0 meters (International Models only);
Default = 0.0, or Off
Temp Offset will adjust the temperature readout by the amount entered.
Speed Calibration will adjust the speed readout by the amount entered. This menu option is
available if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once.
Setup Menu Tab
1
2
3
4
5
1 readout 1
2
readout 2

Depth Offset

(Advanced)
Settings: Various, see below.
Temp. Offset
(Advanced)
Settings: -10.0 to +10.0 degrees, Default = 0.0, or Off

Speed Calibration

(Advanced, with Speed paddlewheel only)
Settings: -20% to +20%, Default = 0%
Sonar View
3 readout 3
4
readout 4
74
5 readout 5