Power On - Humminbird HELIX 5 SONAR Operation Manual

Power On

Follow the instructions below to power on your Humminbird control head.
1. Press the
2. When the Title screen is displayed, press the MENU key to access the Start-Up Options
Menu.
3. Select Normal, and press the RIGHT Cursor key.
• If you wait too long to select a Start-Up Option, the system will default to whichever
menu is already highlighted.
• If a functioning transducer is connected, Normal operation will be selected
automatically, and your control head can be used on the water.
• You can also select Simulator to learn how to use your control head and save settings
in advance for later use. See Start-Up Options Menu for more information.
4. Quick Setup: If this is the first time the unit has been powered on (after installation or
after restoring defaults), the Quick Setup dialog box will display on the screen. Use the
4-WAY Cursor Control key to change the settings. Press the EXIT key to close the dialog
box.
NOTE: The Quick Setup settings can be changed at any time. See each menu option in The Menu System
for details.
HELIX Series Title Screen
POWER/LIGHT key.
5
Power On