Page 1
USER MANUAL – EN IN 10554 Inversion Table inSPORTline Inverso Profi The specification of this product may vary from this photo, subject to change without notice.
CONTENTS NOTICE .................................. 3 INVERSION BENEFITS............................3 SAFETY PRECAUTIONS ............................. 3 OVERVIEW DRAWING ............................5 PARTS LIST ................................6 HARDWARE................................6 ASSEMBLY INSTRUCTIONS ..........................7 USING THE INVERSION TABLE ........................12 SUGGESTIONS FOR USE ..........................12 TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS ............13 WARNING: Before beginning this or any exercise program, consult your physician.
Please have the following information ready when requesting for service: Your name Phone number Model number Serial number Part number Proof of purchase If the product has major defects, please return the product to the store of purchase within the period allowed by the store.
Page 4
6. Make sure your equipment is correctly assembled before you use it. Be sure all screws, nuts, and bolts are tightened prior to use. 7. Do not operate this or any exercise equipment if it is damaged. 8. Watch your body: come up slowly, dizziness after a session means you came up too fast. Wait a while after eating before using the machine.
PARTS LIST PART DESCRIPTION Leather back + frame Arm support Adjustable boom Rung Heel holder bracket Bottom connecting rod Bottom stand Heel holder Round rod Oblate rod Foot rest Main structure HARDWARE ITEM NO. DESCRIPTION M10*45 nut ⌀20* ⌀10*1.5 washer M10*45 screw M10*60 screw M10*60 washer...
ASSEMBLY INSTRUCTIONS MAIN STRUCTURE ASSEMBLY: 1. Use (31) Main Structures and (16) Bottom Connection Rod with (14) Screws. 2. Use (12) Rung with (11) Screws. 3. Use (20) Bottom Stands with (6) Screws, (7) Washers and (8) Nuts.
Page 8
ARM SUPPORT ASSEMBLY: Use (5) Arm Supports with (6) Screws, (7) Washers and (8) Nuts on both sides. FOOT LOCKING SYSTEM ASSEMBLY: 1. Use (23) Oblate Rod and (10) Adjustable Boom with (28) Screws.
Page 9
2. Use (21) Heel Holders with (23) Oblate Rod. 3. Use (22) Round Rod and (15) Heel Holder Brackets with (29) Screw and (13) Nut.
Page 10
4. Use (24) Screws, (25) Washers and (26) Nuts to tighten the Foot Rests. BACK REST ASSEMLY: Use (1) Leather Back + Frame with (4) Screws, (3) Washers and (2) Nuts.
Page 11
ADJUSTABLE BOOM ASSEMBLY: ARMS ASSEMBLY: Use (9) Arms with (30) Screws. Finally, tighten all the screws and nuts to make sure your inversion table is safe to use. Congratulations! You have finished assembling this inversion table.
USING THE INVERSION TABLE 1. Start by lying fully back on the bed with your hands at your side, or resting on your thighs. 2. Keeping your hands close to your body, begin to raise your arms slowly allowing the table to rotate backward.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS General Conditions of Warranty and Definition of Terms All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 40/1964 Coll. Civil Code, Act No. 513/1991 Coll., Commercial Code, and Act No.
Need help?
Do you have a question about the IN 10554 and is the answer not in the manual?
Questions and answers