Create Wired Connection With Automatic Ip Address; Create Wired Connection With Static Ip Address - Philips MCI300/05 User Manual

9
Press the alphanumeric buttons to enter
the static IP address, then press .
10
Press or , then to select (Apply
settings?) [Yes].
The MCi300 displays a confirmation
»
screen that the settings are saved.
Create wired connection
with automatic IP address
This chapter shows you how to create a wired
connection to a home network with automatic
IP address.
1
Use an Ethernet cable (sold separately)
to connect the MCi300 to the router that
is connected to your home network with
broadband Internet access.
2
Ensure that the MCi300 is turned on.
• First-time setup when you connect
the MCi300 to the power supply
(continue with step 5).
• Change network settings after first-
time setup (continue with step 3-5).
3
On the MCi300, press MENU.
4
Press or , then to select[Settings] >
[Network ].
5
Press or , then to select[Wired] >
[Automatic] > (Apply settings?) [Yes].
» The MCi300 displays a confirmation
screen that the settings are saved.
Create wired connection
with static IP address
This chapter shows you how to create a wired
connection to a home network with automatic
IP address.
1
Use an Ethernet cable (sold separately)
to connect the MCi300 to the router that
is connected to your home network with
broadband Internet access.
EN
12
2
Ensure that the MCi300 is turned on.
• First-time setup when you connect
the MCi300 to the power supply
(continue with step 5-7).
• Change network settings after first-
time setup (continue with step 3-7).
3
On the item, press MENU.
4
Press or , then to select[Settings] >
[Network ].
5
Press or , then to select[Wired] >
[Static].
6
Press the alphanumeric buttons to enter
the static IP address, then press .
7
Press or , then to select (Apply
settings?) [Yes].
The MCi300 displays a confirmation
»
screen that the settings are saved.