Create Wired Connection With Automatic Ip Address; Create Wired Connection With Static Ip Address - Philips Streamium 544-9056 User Manual

• To cycle through the alphanumeric
characters that are available, press a
button repeatedly.
• To delete the last character entry from
the display, press CLEAR.
This chapter shows you how to create a
wireless connection to a home network
with static IP address.
1
Ensure that your encryption key (if
required) is available.
2
Turn on your wireless access point or
wireless router with broadband Internet.
3
Turn on Wireless Micro Hi-Fi System.
4
On Wireless Micro Hi-Fi System, press
MENU.
5
Select [Settings] < [Network] >
[Wireless] and confirm.
6
Select the network from the list in the
display.
• Enter encryption key with the
remote control, then press OK /
to continue (if required).
7
Select [Static] and confirm.
8
Enter the static IP address with the
remote control and confirm.
9
Select (Apply settings?) [Yes] and
confirm.
Wireless Micro Hi-Fi System displays a
»
confirmation screen that the settings
are saved.
Create wired connection
with automatic IP address
This is how to navigate and select with the
remote control:
• Press or to select a menu option.
• Press to confirm a selection.
• Press to go back to the previous
screen.
• Press HOME to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
• To select a number or an alphanumeric
character, press a button once or more
until you see the number or alphabetic
character in the display of Wireless Micro
Hi-Fi System.
• To cycle through the alphanumeric
characters that are available, press a
button repeatedly.
• To delete the last character entry from
the display, press CLEAR.
This chapter shows you how to create
a wired connection to a home network
with automatic IP address.
1
Use an Ethernet cable (sold separately) to
connect Wireless Micro Hi-Fi System to
the access point or router that connects
to your home network with broadband
Internet access.
2
Turn on your wireless access point or
wireless router with broadband Internet.
3
Turn on Wireless Micro Hi-Fi System.
4
On Wireless Micro Hi-Fi System, press
MENU.
5
Select [Settings] > [Network] > [Wired]
> [Automatic] > (Apply settings?) [Yes]
and confirm.
Wireless Micro Hi-Fi System displays a
»
confirmation screen that the settings
are saved.
Create wired connection
with static IP address
This is how to navigate and select with the
remote control:
• Press or to select a menu option.
• Press to confirm a selection.
• Press to go back to the previous
screen.
HOME to go to the Home menu.
• Press
The alphanumeric buttons of the remote
control are multi-function buttons:
• To select a number or an alphanumeric
character, press a button once or more
EN
11