Table of Contents
Advertisement
•
To delete the last character entry from the
display, press CLEAR .
This chapter shows you how to create a
wireless connection to a home network
with static IP address.
1
Ensure that your encryption key (if
required) is available.
2
Turn on your wireless access point or
wireless router with broadband Internet.
3
Turn on the WAC7500.
4
On the WAC7500, press MENU .
5
Select [Settings] < [Network] >
[Wireless] and confirm.
6
Select the network from the list in the
display.
•
Enter encryption key (if required)
with the remote control, then press
OK to continue.
7
Select [Static] and confirm.
8
Enter the static IP address with the remote
control and confirm with OK .
9
Select (Apply settings?) [Yes] and confirm.
The WAC7500 displays a confirmation
»
screen that the settings are saved.
Create wired connection
with automatic IP address
This is how to navigate and select with the
remote control:
•
Press or to select a menu option.
•
Press to confirm a selection.
•
Press to go back to the previous
screen.
•
Press HOME to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
•
To select a number or an alphanumeric
character, press a button once or more
until you see the number or alphabetic
character in the display of the WAC7500.
wac7500_um_01eng.indd 12
•
To cycle through the alphanumeric
characters that are available, press a button
repeatedly.
•
To delete the last character entry from the
display, press CLEAR .
This chapter shows you how to create a
wired connection to a home network with
automatic IP address.
1
Use an Ethernet cable (sold separately) to
connect the WAC7500 to the access point
or router that connects to your home
network with broadband Internet access.
2
Turn on your wireless access point or
wireless router with broadband Internet.
3
Turn on the WAC7500.
4
On the WAC7500, press MENU .
5
Select [Settings] > [Network] > [Wired]
> [Automatic] > (Apply settings?) [Yes]
and confirm.
The WAC7500 displays a confirmation
»
screen that the settings are saved.
Create wired connection
with static IP address
This is how to navigate and select with the
remote control:
•
Press or to select a menu option.
•
Press to confirm a selection.
•
Press to go back to the previous
screen.
•
Press HOME to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
•
To select a number or an alphanumeric
character, press a button once or more
until you see the number or alphabetic
character in the display of the WAC7500.
•
To cycle through the alphanumeric
characters that are available, press a button
repeatedly.
•
To delete the last character entry from the
display, press CLEAR .
EN
1
14-08-08 16:29:43
Hide quick links:
Advertisement
Table of Contents
