RCF HDL 12-AS Owner's Manual page 25

3.4 POLE MOUNTING WITH POLE MOUNT 3X HDL 6-A
M
4. TRANSPORTATION:
POSITIONING THE SPEAKERS ON THE KART
F
1. Secure the front side of the speaker to the kart using the quick lock pins "F"
2. Secure the rear side of the speaker to the kart using the quick lock pins "P".
Careful: the hole to be used is 0° on the speaker rear bracket.
3. Proceed with the second speaker repeating steps "1" and "2"
WARNING: the kart has been designed to carry up to 6 speakers.
WARNING: ALWAYS VERIFY
- THE SYSTEM SOLIDITY IN EVERY CONFIGURATION
- THE POLE PAYLOAD
F
1. Secure the flybar on the pole by screwing the knob "M"
2. Assemble the speakers HDL6-A with the same procedure
used on stacking on sub HDL12-AS
P