Table of Contents
Advertisement
1. FLYBAR SETUP
The HDL6 flybar allows to set the central bar in two different configurations "A" e "B".
Configuration "B" allows a better upper inclination of the cluster.
1.1 SET THE CENTRAL BAR IN "B" POSITION
X
X
X
R
R
R
S
S
S
S
S
S
This accessory is provided in "A" configuration.
To set it in "B" configuration:
1. Remove the cotter pins "R", pull out the linchpins "X" and the
quick lock pins "S"
2. Lift the central bar then re-position it making the "B" indication
on the label and the holes "S" match together.
3. Re-assemble the flybar repositioning the pins "S", the linchpins
"X" and the cotter pins "R".
FLYBAR
WITH CENTRAL BAR
IN "A" POSITION
FLYBAR
WITH CENTRAL BAR
IN "B" POSITION
CENTRAL BRACKET LABEL
Hide quick links:
Advertisement
Table of Contents
