External 4-In-1 Charger Overview - Chauvet DJ Freedom Stick Pack Quick Reference Manual

Freedom Stick Pack QRG
Product
Description
Product
Overview
External 4-in-1
Charger
Overview
AC Power
Fuse
Replacement
The Freedom Stick Pack includes four Freedom Stick products, an external power
supply, and a carrying bag.
The Freedom Stick is a low-profile pillar of light with 16 tri-color LEDs on either
side. It is designed for 100% cable free operation with a rechargeable lithium battery
and a built in wireless D-Fi tranceiver. With pixel-mapping capabilities, the
applications of the Freedom Stick are unlimited for DJs, bands, and all artists alike.
DC Power In
Menu Buttons
Power In
Fuse Holder
This product has an auto-ranging external 4-in-1 charger that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz. It has 4 outputs of 15 VDC each. The
LED indicator turns red while it is plugged into a power source.
To eliminate wear and improve its lifespan, during periods of non-use completely
disconnect from power via breaker or by unplugging it.
To replace the fuse in the Freedom Stick Pack external 4-in-1 charger:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
LED Indicator
On/Off Switch
LED Display
LED Indicator
3
DC Power Out x4
EN