Cd/Mp3-Cd Operation; Loading A Disc; Basic Playback Controls - Philips MCB240 User Manual

CD/MP3-CD Operation

Important!
The lens of the CD player should never be
touched.

Loading a disc

This CD player plays Audio Discs including CD
Recordables, CD-Rewritables and MP3 CD.
●
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Press SOURCE on the front panel of the
system to select CD or press CD on the
remote.
2
Press OPEN•CLOSEç to open the CD
compartment.
➜ OPEN is displayed when the compartment
cover slides up.
3
Insert a disc with the printed side facing up.
Press OPEN•CLOSEç again to close the
compartment.
➜ CLOSE is displayed followed by READING as
the CD player scans the contents of a disc, and
then the total number of tracks and playing time
(or the total number of albums and tracks for
MP3 disc) are shown.
14

Basic playback controls

To play a disc
●
Press ÉÅ to start playback.
➜
The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
●
Press / once or repeatedly until the
S T
desired track number appears in the display.
●
If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press ÉÅ to start playback.
Text display during playback
In CD mode
●
Press DISPLAY•ID3 repeatedly to see the
following information.
➜
Track number and elapsed play time of
current track.
➜
Remaining play time of current track.
➜
Total number of tracks played and total
elapsed time.
➜
Total remaining number of tracks and total
remaining play time.
In MP3-CD mode
●
Press DISPLAY•ID3 repeatedly to select four
display modes : Number, Album &Title, Album &
Track Number and ID3.
Number ➜ Track number and elapsed play time.
Album &Title ➜ Album name and track title
name.
Album & Track Number ➜ Album number
and track number.
ID-3 ➜ ID-3 tag scrolls once