Page 1
Quick Start Guide What’s in the Box? You should find these items upon opening the box. Stand 140mm (5.51") Mounting kit (1x template, 2 x screws) Remote control with 1 x CR2025 battery Quick start guide Step A Step Step Pull out the plastic protective sheet before use.
Install Mounting stand onto the set Put MCB275 on a flat and firm surface, rear side facing up. As shown, align the stand to the slots at set’s bottom, down. Push the stand down into the slots. Note: - For wall mounting, please refer to the User Manual, Appendix: How to mount your MCB275 onto Walls.
Setting the clock In the standby mode, press and hold CLOCK ➜ The clock digits for the hours continue to flash. 4 / ¢ ¡ / ™ Press on the remote control) repeatedly to set the hours. Press to confirm. CLOCK ➜...
Page 4
Enjoy Programming and tuning to FM adio stations Press repeatedly (or SOURCE tuner source. Press SCAN/PROGRAM PROG than two seconds to program all available stations in order of waveband. ¡ / ™ Press on the remote control) until the desired ALBUM/PRESET +/- preset station is displayed.