DAB reception
1
Press STANDBY-ON/ECO POWERy to on,
then press SOURCE to select DAB (or press
DAB on the remote control).
➜
Display shows Welcome to Digital Radio,
followed by
.
➜
The list of available stations is created/
restored, and the set tunes to the last station
detected / selected.
➜
The name of current station is shown in the
1st display line. The broadcasting text, if available,
scrolls in the 2nd display line (DLS in default
setting).
The first time you tune to this DAB
●
If the tuning fails, the display shows
for 5 seconds and
and/or
DAB
appears.
DAB
DAB Reception
➜
Press TUNE 1 / 2 once or more (or
on the remote) to enter Autoscan full
T
(see Tuning/retuning)
Next time you tune to DAB
●
If the tuning fails, the display shows
or
➜
Retuning to alternative services/frequency
starts automatically.
➜
A dot appears in the screen every 0.5
second.
➜
After successful tuning, the station name
appears and broadcasting text scrolls.
●
If retuning also fails, the display shows
or
➜
Use Autoscan to refresh the list of available
stations (see Resetting).
➜
Press ENTER to go to a tuning indication
(see Tuning/retuning: To improve
reception).
Tuning/retuning
Autoscan
Autoscan local - scans all the UK frequencies
(in default setting)
Autoscan full - scans all Band III and Band L
frequencies.
●
To start Autoscan local, briefly press SMART
SCAN.
●
To start Autoscan full, press and hold
SMART SCAN until
➜
Display shows
of stations having been detected. A progress bar
appears, indicating the scanning progress.
S
.
. You can either
DAB
appears.
and the number
/
17