User Interface Organization; Login And Main Menu; Table 3. Main Menu Selections - Canoga Perkins 3240S User Manual

User Interface Organization

The user interface consists of selectable, nested screens, available in this order:
The user interface consists of nested screens, selectable by number and available in this order:
Main Menu
1. SNMP Agent Configuration
5. Host and Community Tables
1. Host Table
2. Community Strings Table
6. System Variables Configuration
7. SLIP Configuration
2. Multiplexer Configuration/Status
1. System Configuration/Status
1. Optic Redundancy Control
2. Composite Loopback Menu
2. I/O Port Configuration/Status
3. Set/Clear Port Loopback
3. Trap Configuration
1. System Trap Configuration
2. Port Traps
3. Diagnostics
4. Software Upgrade
5. Modem Setup

Login and Main Menu

The first screen is the Login Menu. If this is your initial setup and no password has been set, press
<Enter> at the prompt for the password. Otherwise, type your password and press <Enter>.
You can reach all configuration options from the Main Menu; see Table 3.

Table 3. Main Menu Selections

Menu Item
1. SNMP Agent Configuration
2. Multiplexer Configuration/Status View and set values for the system information parameters
3. Diagnostics
4. Software Update
5. Modem Setup
6. User Interface Password
EdgeAccess
View and set values for the communications parameters
Run the diagnostic PING
Download and install new firmware
View and set values for modem parameters
Set password for a connections through the serial port or Telnet
3240S Fiber-Optic Multiplexer
Description
3-3/(3-10 Blank)