Table of Contents
Advertisement
Accessories Supplied
Accessories Available
Cables
General Information
Accessories
Accessories
Figure 1-1 on page 1-2 refers to the HP 8511A with the accessories and part
numbers supplied.
The HP 8511A can support a multitude of measurement systems. The
calibration, verification and adapter kits listed below may or may not be
applicable for any given system. Please consult with your local HP Field
Engineer for specific recommendations. Additional information is included
in the HP 8510 manual set and the HP 8510 data sheet.
Connector Type
Calibration Kit
3.5 mm
HP 85052B,E
7 mm
HP 85050B,C,D
Type-N 50 Ω
HP 85054B
3.5 to 7 mm
The choice of cables depends on the type of signal separation device(s) used
and the system configuration. A twenty foot long IF interconnect cable can
be ordered using HP part number 08510-60103.
1-10 HP 8511A Test Set Operating and Service Manual
Verification Kit
Adapter Kit
HP 85053B
HP 85051B
HP 85055A
HP 85130A,B
Advertisement
Table of Contents
