Packaging - HP 8511A Operating And Service Manual

Installation

Packaging

Packaging
If reshipping is required, each test set should be repackaged in the original
factory package. Containers and materials identical to those used by the
factory are available through Hewlett-Packard offices.
If comparable packaging materials are used, wrap the test set in heavy paper
or anti-static material. If shipping to an HP Office or Service Center,
complete and attach a service tag (refer to the "Installation" chapter in the
HP 8510 On-Site Service Manual). Use sufficient shock absorbing material
on all sides of the HP 85llA to provide a thick, firm cushion and to prevent
movement. Seat the shipping container securely and mark it FRAGILE.
In any correspondence with HP, refer to the HP 8511A by full model and
serial number (located on the rear panel).
3-6 HP 8511A Test Set Operating and Service Manual