APPLICATION CONSIDERATIONS
Geothermal Systems
Closed loop and pond applications require specialized design
knowledge. No attempt at these installations should be made unless
the dealer has received specialized training.
Note: Package unit shown. GZ unit is connected to furnace or fan coil (see page 6).
(1) Line Voltage Disconnect (unit)
(2) Flex Duct Connection
(3) Low Voltage Control Connection
(4) Line Voltage Connection
(5) P/T Ports
(6) Vibration Pad
(7) Condensate Drain Connection
(8) Ground Loop Connection Kit
(9) Ground Loop Pumping Package
(10) Polyethylene with Insulation
(11) Line Voltage Disconnect (electric heater)
Fig. 3 - - Example Geothermal System Setup
Anti- -freeze solutions are utilized when low evaporating conditions
are expected to occur. Refer to the Flow Center installation
manuals for more specific instructions. (See Fig. 3)
Diagram shows typical vertical
package unit installation and is
for illustration purposes only.
Ensure access to Heat Pump is
not restricted.
3
A14132