Basic Functions; Switching The System On; Power-Saving Automatic Standby; Adjusting Volume And Sound - Philips MC-V320 User Manual

IMPORTANT!
Before you operate the system, complete
the preparation procedures.

Switching the system on

G Press 2 STANDBY ON.
➜ The system will switch to the last selected
source.
G Press VCD, TUNER, TAPE or AUX on the
remote control.
➜ The system will switch to the selected source.
To switch the system to standby mode
G Press 2 STANDBY ON.
G If in recording mode, press STOP 9 first.
➜ The volume level(up to a maximum volume
level of 20), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.

Power-saving automatic standby

As a power-saving feature, the system
automatically switches to standby 15 minutes
after a tape or CD has reached the end and no
control is operated.

Basic Functions

Adjusting volume and sound

1
Press VOLUME –/+ to decrease to increase
volume on the system.
➜ Display shows the volume level VOL and a
number from MIN1, 2, ...38, 39 MAX.
2
Press DSC repeatedly to select the desired
sound effect: CLASSIC/ JAZZ/ ROCK/
OPTIMAL.
3
Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB ON or DBB OFF.
Note:
– To listen through the headphones connect the
headphones plug to the PHONES socket at the top
of the system.
➜ The speakers will be muted.
13