Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Philips MC-200 Manual

STANDBY
PROGRAM
ON
SELECT
SOURCE
DBB DSC
INTERACTIVE SOUND
iR SENSOR
STOP PRESET
REPEAT TUNING RECORD
REV MODE REV MODE
BAND BAND
PREV

Setting the clock

There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting (RDS versions
only)
1
Tune to a RDS station (see "Radio Reception").
2
Press CLOCK for more than 2 seconds.
SEARCH RDS TIME is displayed for a
maximum of 90 seconds; the time is then
displayed.
NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.
Manual clock setting
1
In standby, press CLOCK.
The clock digits for the hours flash.
2
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3
Press CLOCK again.
The clock digits for the minutes flash.
4
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5
Press CLOCK to confirm the time.
pg 001-022/MC200/22-Eng
CD
PROGRAM
TIMER
TIMER
ON•OFF
INCREDIBLE SURR.
VOLUME
PLAY•PAUSE RDS
CLOCK
TUNING
SHUFFLE
SIDE A/B SIDE A/B
NEXT
19

Clock/Timer

Setting the timer

The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
You can also use it to record a favourite tuner
programme at a set period (see "Recording
timer")
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In any mode, press TIMER ON•OFF for more
than 2 seconds.
2
Turn VOLUME clockwise to select sound
source.
Display sequence shows CD, TUNER, TAPE or
REC TUNER.
3
Press TIMER ON•OFF to confirm your
desired mode.
The selected source
is shown. Display sequence scrolls SET ON
TIME and
flashes. The clock digits for the
TIMER
hours flash.
4
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
5
Press TIMER ON•OFF again.
The clock digits for the minutes flash.
6
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
7
Press TIMER ON•OFF to confirm the time.
The timer is now set and activated.
Activating and deactivating
TIMER
In standby or during playback, press
TIMER ON•OFF once.
Display shows if activated, and
TIMER
disappears if deactivated.
10/5/01, 4:26 PM
or
TUNER
CD TUNER
19
3140 115 28691