Basic Functions; Plug And Play - Philips FWV357/55 User Manual

DIGITAL SOUND DISPLAY
STANDBY-ON
DSC
SLEEP
CD
OPEN/
CLOSE
DISC
CHANGE
IMPORTANT!
Before operating the system, complete the
preparation procedures.

Plug and Play

Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main supply, "AUTO
INSTALL - PRESS PLAY" is displayed.
2
PressÉ Å on the system to start installation.
➜ "INSTALL" is displayed, followed by "TUNER"
and "AUTO".
➜
starts flashing.
PROG
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by MW band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To reinstall Plug and Play
1
In standby or demonstration mode, press and
holdÉ Å on the system until "AUTO INSTALL
- PRESS PLAY" is displayed.
2
PressÉ Å again to start installation.
➜ All previously stored radio stations will be
replaced.
BAND TAPE 1 • 2 CDR/VIDEO
TUNER TAPE AUX
NTSC/
PAL
SEARCH •TUNING PLAY• PAUSE SEARCH •TUNING
ALBUM- ALBUM+
MP3-CD
TITLE- TITLE+
▲
PREV/ PRESET STOP•CLEAR / DEMO STOP NEXT/ PRESET▲
PBC RETURN PROG CLOCK•TIMER
A. REPLAY RECORD

Basic Functions

MASTER
VOLUME
MIC
LEVEL
DIM
To exit without storing the Plug and Play
● Press Çon the system.
➜ If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA" will be
displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
MIC
13