De-Specific Configuration Parameters; Table 6 - De Configuration Parameters - Honeywell STT850 Series User Manual

4.3.4 DE-Specific Configuration Parameters

Select the Configure button, and configure parameters according to
Table 6.
Read (R) or
Parameter
Read/Write (R/W)
LRL
URL
LRV
URV
PV Units
SV Units
Sensor Type
Damping
Span
Linearization
dual input model
*A cannot be configured
Select the Back button to go back to the DE MAIN MENU.
4.3.4.1 Notes on Damping (Digital Noise Reduction)
You can adjust the damping time to reduce output noise. By way of suggestion, set damping to the
smallest value reasonable for your process.
Page 18
Table 6 – DE Configuration Parameters
Configuration Details
R
Lower Range Limit, Floating Point
R
Upper Range Limit, Floating Point
R/W
Lower Range Value, Floating Point
R/W
Upper Range Value, Floating Point
R/W Process Variable Units: scaling value selection;
R/W Secondary Variable scaling units:
R/W Sensor type used in the Transmitter*
R/W Select digital noise reduction; (see note below)
Process Range: URV – LRV, Floating Point
R
Selection of output characterization configuration: linear or non-
R
linear
as a single input model.
STT850 Series HART/DE Option User's Manual
o o
C or F
Revision 4.0