Cd Synchro Recording; Dubbing Tapes - Philips FWP750 User Manual

CD Synchro Recording

1
Press CD 1•2•3 to select the disc.
G Press í or ë to select the desired track to
start recording.
G You can program the tracks in the order you
want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2
Press REC to start recording.
➜ The disc will start playback automatically.
To select another track during recording
1
Press PAUSEÅ to interrupt recording.
2
Pressí or ë to select the desired track.
3
Press PLAYÉ to resume recording.
To stop recording
G Press Ç.
➜ Recording and disc playback will stop
simultaneously.

Dubbing Tapes

1
Load the prerecorded tape in tape deck 1.
G You can set the tape to the desired passage
where recording will start.
2
Press DUBBING.
➜ Playing and recording will start simultaneously.
➜ "DUB OOO" will be displayed.
G Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tapes to side B
and repeat the procedure.
To stop dubbing
G Press Ç.
Notes:
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
– You can listen to another source while dubbing.
pg 001-031/P750/37-Eng
Tape Operation/Recording
25
3139 115 20621
3/7/01, 4:12 PM
25