Test Tone; Switching The Dolby Pro Logic - Philips FWP750 User Manual

Dolby Pro Logic
➜ "TEST TONE" followed by "ADAPT
BALANCE, CENTER AND REAR LEVEL" will
be displayed.
➜ The test signal will last for about 90 seconds.
Adjust the sound level
+
-
Front speakers
G Press BALANCE L on the remote control for
left speaker and press BALANCE R on the
remote control for right speaker.
➜ "BAL L +XX" or "BAL R +XX" will be
displayed.
Center speaker
G Press CENTER + or - on the remote
control.
➜ "CENT +XX" or "CENT-XX" will be displayed.
Surround speakers
G Press REAR + or - on the remote control.
➜ "REAR +XX" or "REAR -XX" will be
displayed.
To switch off the TEST TONE
G Press TEST TONE and then DPL on the
remote control.
Notes:
– It is advisable to set the speakers' level at
normal listening level.
– "XX" denotes the sound level.

Switching the Dolby Pro Logic

G Press PRO LOGIC (DPL)
repeatedly to select and cycle
through the various sound
modes.
➜ The Dolby Pro Logic display
panel will light up with the
selection.
Dolby Surround ➜ Dolby Center Phantom
➜ Dolby 3 Stereo ➜ Stereo ➜ Dolby
Surround ...
12
pg 001-031/P750/37-Eng
Dolby Surround
This setting is for a full
Dolby Surround Pro
Logic mode.
➜ "DOLBY SURROUND"
will be displayed.
Dolby Center Phantom
This setting is for use
without the center
+
-
speaker. It redistributes
the center speaker
sound to the left and
right speakers, providing conventional stereo
across the front.
➜ "DOLBY CENTER PHANTOM" will be
displayed.
Dolby 3 Stereo
Use this setting when full
surround is not required,
but a wide stereo sound
is desired. It requires
only the left, right and center speakers.
➜ "DOLBY 3 STEREO" will be displayed.
Normal Stereo
This setting is for normal
stereo sound without
Dolby Pro Logic. It
requires only the left and
right speakers.
➜ "STEREO" will be displayed.
PRO LOGIC
12
L
C R
LEFT RIGHT
CENTER
S S
SURROUND
SPEAKERS
L
C R
LEFT RIGHT
CENTER
S S
SURROUND
SPEAKERS
L
C R
LEFT RIGHT
CENTER
S
S
SURROUND
SPEAKERS
L
C R
LEFT RIGHT
CENTER
S
S
SURROUND
SPEAKERS
3139 115 20621
3/7/01, 4:12 PM