One Touch Recording; Cd Synchro Recording; Dubbing Tapes; Digital Recording Via Digital Out - Philips FW-C785 User Manual

pg 01-30/C785/34-Eng
Tape Operation/Recording
4
Press AUTO REVERSE repeatedly to select a
recording mode.
å for recording on one side only.
∂ for recording on both sides.
To record with Dolby B NR, press DOLBY B
NR.
5
Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
starts flashing.
It is not possible to change tape side.
It is not possible to listen to another source
except for dubbing tapes.
It is not possible to activate the timer function.

One Touch Recording

1
Press CD, TUNER or AUX to select the source.
2
Start playback of the selected source.
3
Press REC to start recording.
To stop recording
Press Ç on the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" will be displayed.

CD Synchro Recording

1
Press CD 1•2•3 to select the disc.
Press í or ë to select the desired track to
start recording.
You can programme the tracks in the order you
want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2
Press REC to start recording.
The disc will start playback automatically.
To select another track during recording
1
Press PAUSEÅ to interrupt recording.
2
Press í or ë to select the desired track.
3
Press PLAYÉ to resume recording.
24
12/27/01 10:19 AM
1
2
Page 24
To stop recording
Press Ç.
Recording and disc playback will stop
simultaneously.

Dubbing Tapes

Load the prerecorded tape in tape deck 1.
You can set the tape to the desired passage
where recording will start.
Press DUBBING.
Playing and recording will start simultaneously.
"DUB 000" will be displayed.
Dubbing of tapes is possible on one side of the
tape only. To continue record on the reverse
side, at the end of side A, flip the tapes to side B
and repeat the procedure.
To stop dubbing
Press Ç.
Notes:
– Only å playback mode is available during
dubbing.
– Dubbing of tapes is possible only from tape deck
1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
– You can listen to another source while dubbing.
– Dolby B NR has no influence during dubbing. An
original tape recorded with Dolby B NR
automatically produces a copy with Dolby B NR.

Digital Recording via Digital Out

For CD digital recording, please refer to the
instruction manuals for the CD recorder, digital
audio equipment and so forth.