One Touch Recording; Cd Synchro Recording; Dubbing Tapes; Digital Recording Via Digital Out - Philips FW-C870 User Manual

Tape Operation/Recording
5
Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
➜
starts flashing.
REC
G It is not possible to change tape side.
G It is not possible to listen to another source
except for dubbing tapes.
G It is not possible to activate the timer function.

One Touch Recording

1
Press CD, TUNER or AUX to select the
source.
2
Start playback of the selected source.
3
Press RECORD to start recording.
To stop recording
G Press Ç.
Note:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" will be displayed.

CD Synchro Recording

1
Press CD 1•2•3 to select the disc.
G Press í or ë (or Digits 0–9 on the remote
control) to select the desired track to start
recording.
G You can program the tracks in the order you
want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2
Press RECORD to start recording.
➜ The disc will start playback automatically.
To select another track during recording
1
Press PAUSEÉ Å to interrupt recording.
2
Pressí or ë (or Digits 0–9 on the remote
control) to select the desired track.
3
Press PLAYÉ Å to resume recording.
To stop recording
G Press Ç.
➜ Recording and disc playback will stop
simultaneously.
24
pg 001-030/C870/37-Eng

Dubbing Tapes

1
Load the prerecorded tape in tape deck 1.
G You can set the tape to the desired passage
where recording will start.
2
Press DUB (HSD) once for normal speed
dubbing or twice (within 2 seconds) for high
speed dubbing.
➜ Playing and recording will start simultaneously.
➜ "NORMAL" (normal speed) or "FAST" (high
speed) will be displayed, followed by "DUB" with
an indication on the selected tape side direction.
➜ During high speed dubbing, the volume will
be reduced and
G Dubbing of tapes is possible on one side of the
tape only. To continue record on the reverse
side, at the end of side A, flip the tapes to side B
and repeat the procedure.
To stop dubbing
G Press Ç.
Notes:
– Only å mode is available during dubbing.
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
– You can listen to another source while dubbing.

Digital Recording via Digital Out

For CD digital recording, please refer to the
instruction manuals for the CD recorder, digital
audio equipment and so forth.
24
will appear on the display.
HSD
3139 115 20391
12/8/00, 1:55 PM