Sound Settings; Setting The Sound; Setting Fader/Balance - JVC KW-NT800HDT Instruction Manual

Sound Settings

Setting the Sound

You can set the audio effects and sound quality in the vehicle here.
Set the sound when the AV source is selected. This cannot be set when the tuner is on standby.
1
Press - <Settings>.
2
Touch <Sound>.
3
Set each item.
The following items can be set.
Menu items
Fader/Balance Sets the right and left, and
front and rear volume balance.
(☞ page xx)
Vehicle Type
Sets the vehicle type. (☞ page xx)
Speaker Settings Sets the speaker configuration.
(☞ page xx)
Position Sets the listening position.
(☞ page xx)
Equalizer
Sets the sound quality. (☞ page xx)
Volume Adjust Sets the volume of each AV source
equal. (☞ page xx)
Audio Effects Sets the audio effects.
(☞ page xx)
Others Sets the built-in amplifier and pre-
out terminal. (☞ page xx)
EN_KW-NT800HDT_NT700[J].indb 90 EN_KW-NT800HDT_NT700[J].indb 90

Setting Fader/Balance

You can set the right and left, and front and rear
volume balance here.
1
Press
2
Touch <Fader/Balance>.
3
Touch the position to be balanced.
Description
You can adjust the right / left balance by touching
touching
Touching <Center> sets the right and left, and
front and rear balance at the center.
90
- <Settings>.
or , and adjust front / rear balance by
or .
11/21/2011 6:08:20 PM 11/21/2011 6:08:20 PM