Listening To The Ipod/Iphone Device - JVC KW-NT800HDT Instruction Manual

Listening to the iPod/iPhone device

Connecting iPod/iPhone
• Use the following cables:
– To listen to the music: USB 2.0 cable (accessory
of the iPod/iPhone)
– To watch the video: USB Audio and Video cable
for iPod/iPhone—KS-U49 (not supplied)
USB 2.0 cable
(accessory of the iPod/iPhone)
or
• When you turn on this unit, the iPod/iPhone is
charged through the unit.
• You can control the following iPod/iPhone models:
– iPod with video (5th Generation) *
– iPod classic *
– iPod nano (6th Generation)
– iPod nano (5th Generation) *
– iPod nano (4th Generation) *
– iPod nano (3rd Generation) *
– iPod nano (2nd Generation)
– iPod nano (1st Generation)
– iPod touch (4th Generation) *
– iPod touch (3rd Generation) *
– iPod touch (2nd Generation) *
– iPod touch (1st Generation) *
– iPhone 4S*
– iPhone 4*
– iPhone 3GS *
– iPhone 3G *
– iPhone*
* To watch the video with its audio, connect the iPod/
iPhone using USB Audio and Video cable (KS-U49, not
supplied).
For some iPod/iPhone models, the performance may be abnormal or unstable during operation. In this case,
disconnect the iPod/iPhone device, then check its condition.
If the performance is not improved or slow, reset your iPod/iPhone.
EN_KW-NT800HDT_NT700[J].indb 69 EN_KW-NT800HDT_NT700[J].indb 69
Setting the iPod control mode and the speed
of the audio books
Head Mode
MIC AV IN/OUT i Pod
VIDEO
iPod Mode
KS-U49 (not supplied)
External Mode
iPod Control Mode
• When using iPod nano (1st Generation) or iPod with
video (5th Generation), only Head mode is selectable.
Head Mode Controls playback from this unit.
iPod Mode
Ext. Mode
69
Control buttons are not displayed.
Controls audio/video playback from the
iPod/iPhone.
• Playback information is shown.
Allows any audio/video signals from
iPod/iPhone.
• No information is shown.
11/21/2011 6:08:10 PM 11/21/2011 6:08:10 PM