Installation Settings - JVC KW-NT800HDT Instruction Manual

Installation settings

When you turn on the unit for the first time, the initial
setup screen appears.
1
Turn on the ignition switch.
The power is turned on, and the startup screen is
displayed for about 5 seconds.
2
Select the language you want for the display
and the voice guidance.
• You can also select the system language through
<Settings> - <System> - <Region> -
<Language>. (☞ page 75)
EN_KW-NT800HDT_NT700[J].indb 12 EN_KW-NT800HDT_NT700[J].indb 12
3
Set the installation settings (1), then press
[OK] (2).
State/ Select the State or Province where
Province you are now.
Time Zone * Select your residential area for
automatic clock adjustment by
GPS signal.
DST * Select [Auto] if your residential
area is subject to Daylight Saving
Time.
Camera Select [On] when connecting the
Input * rear view camera to the CAMERA
IN jack.
* You can also change these settings through
<Settings> - <System>. (☞ page 75)
12
11/21/2011 6:07:43 PM 11/21/2011 6:07:43 PM