Argos roger black series Assembly & User Manual page 9

Assembly Instructions
Step 9
Insert the PEDAL SHAFT
(6) through the tube
located on the BASE
FRAME(3). Slide a
PEDAL CAP(19)onto
each end of the PEDAL
SHAFT(6). Then secure
the PEDAL CAPS(19)
with BUTTON HEAD-
BOLTS(M8x15mm)(60)
and LARGE WASH-
ERS(M8)(83) at both
ends of the PEDAL
SHAFT(6).You need to
use two Allen Wrenches
to tighten the BUTTON
HEAD
BOLTS(M8x15mm)(60)
at both ends of the
PEDAL SHAFT(6) at the
same time.
Step 10
Refer to detail view. Plug
the ADAPTER (102) into
the SOCKET of the
POWER WIRE(100)
located on the
front of the rower. Plug
the ADAPTER (102) into
an electrical outlet.
94
19
60
83
96
3
6
19
83
60
8