Fluke TiR2 User Manual page 33

Item
To program buttons A, B, and/or C:
1. Use the mouse controller to position the pointer over the function icon on
the display screen task bar (A, B, C) you wish to program.
2. Tap E. A popup menu with list of programmable tasks appears.
3. Position the pointer over the desired task and select.
4. Repeat Steps 1-3.
info@Fluke-Direct.com
Table 2-3. Programmable Functions (cont.)
Laser – Used to help you correlate what is on the camera display
screen with what you are looking at. The laser spot is visible in the
control image and can be a valuable reference point for later image
review.
Start Sequence – Used to quickly start the Auto Capture sequence.
(Auto Capture is available on TiR2, TiR4, Ti45 and Ti55 models
only.)
Stop Sequence – Used to quickly stop the Auto Capture image
capture sequence. (Auto Capture is available on TiR2, TiR4, Ti45
and Ti55 models only.)
Image Enhancement – Used to quickly cycle through the image
enhancement settings: "Off," "Normal," "Medium," and "High." Each
time you press the function button, the next setting takes affect.
Picture-in-Picture – Used to quickly switch between full screen view
and picture-in-picture view.
Recalibrate – Used to manually trigger an internal calibration
adjustment.
Fluke-Direct
Camera Overview
Programming Function Buttons
Description
.com
2
1.888.475.5235
2-11