Launch Mode - Dodge Viper2017 User Manual

O P E R A T I N G Y O U R V E H I C L E

LAUNCH MODE

This system maximizes acceleration traction for straight line racing.
1. Bring the vehicle to a complete stop on a level track surface with the engine running.
2. Set the steering wheel for straight ahead driving.
3. Fully depress the clutch and select the first gear position.
4. Push and release the "LAUNCH" button (located on the steering wheel controls).
5. Rapidly press the accelerator pedal to
the floor within one second.
NOTE:
If the instrument cluster message indicates
all conditions are correct for launch and the
throttle is pressed to the floor quickly
(within approximately 1/2 second) the sys-
tem will hold the engine speed to a preset
speed (below the engine rev limiter speed).
6. Release the clutch aggressively. Do not
ride the clutch.
Release the accelerator pedal to deactivate
launch control. Pushing the launch control
button or actuating the brakes will also
deactivate launch control.
NOTE:
• Launch Mode brings the engine to optimum launch RPM and waits for the driver to
release the clutch. Launch Mode then uses engine throttle only to achieve controlled
wheelslip for maximum acceleration through first gear.
• Launch Mode can be used in any of the Electronic Stability Control (ESC) Modes.
• Launch Mode should not be used within the first 500 miles (805 km) of engine break-in.
Launch Mode is intended for off-highway or off-road use only and should not be used
on any public roadways. It is recommended that this feature be used in a controlled
environment, and within the limits of the law. The capabilities of the vehicle as
measured by the performance pages must never be exploited in a reckless or dangerous
manner, which can jeopardize the user's safety or the safety of others. Only a safe,
attentive, and skillful driver can prevent accidents.
56
WARNING!
LAUNCH Button