Ied Test Mode; View Binary Input Values; Overview; Binary Input Module Bim - ABB RET670 Operator's Manual

Section 11
Test the IED
11.2
11.3
11.3.1
11.3.1.1
74
10. Control displays the Synchrocheck, and Apparatus control functions. The
Synchrocheck functions include a number of function related measurements
such as calculated differences. Apparatus control includes up to 19 functions
each with their own set of measurement data regarding interlocking, breaker
and isolator conditions.
11. Scheme communication includes functions that display trip and other signals
used when interzone communication is deployed.
12. Logic displays a choice of functions available to the operator. These are Trip
logic, Event counter, Logic gate, Logic memory and Logic timer set each with
their own set of measurements.
13. Monitoring displays a choice of functions available to the operator. Function
related measurements can be viewed by navigating to the screen for each
individual function. One of the submenus shows the status of the LEDs on the
HMI.
14. Communication displays submenus for Remote communication and Station
communication including Receiving interlock information.
All measurement descriptions in this document reflect the maximum number of
hardware units possible in any application. In reality the hardware in the IED will
be chosen according to a particular application. For example, it is possible to equip
a 1/1 x 19" case IED with 14 I/O modules. In reality fewer I/O modules may be
installed. In the measurements menu the operator will only see data from the
hardware and software installed.

IED test mode

Main menu/Test/IED test mode
Displays a setting which is used to activate and deactivate functions so that tests
can be performed without endangering system stability and a setting with which
events can be enabled or disabled.

View binary input values

Overview

Binary input values display the state of each individual input in the Binary input
modules (BIM). These are indicated with a 1 or 0 depending on whether a signal is
present or not. Binary input modules with enhanced pulse counting capabilities can
receive pulses used for power measurement. The number of pulses received is used
to measure power.

Binary Input Module BIM

Main menu/Test/Binary input values/Binary input modules
1MRK504114-UEN E
Operator's manual