Table of Contents
Advertisement
CHANGE POSITION
Rotating the CHANGE POSITION control moves the cursor to the desired character position to enter or
change.
CHANGE LETTER
Rotating the CHANGE LETTER control scrolls through all alphanumeric display characters - letters,
numbers and punctuation marks are available. Once the desired character is displayed in the cursor
position, simply move the cursor to the next position.
RESET
Pressing the touch-switch next to the reset menu entry sets the name display to the default card alias.
4.10 C
A
ONFIGURE
LARMS
Enter the Configure Alarms menu screen by pressing the touch-switch next to the Alarm Config entry
on main screen 2. Before you can gain access to the alarm configuration screen, you will be prompted
for the proper access code as shown in Figure 4-10.
Proprietary Information of Q
Figure 4-9 Change Name Menu Screen
M
S
ENU
CREEN
Figure 4-10 Keypad Access Code Prompt Screen
S
U
TREAM
Integrity 600 – AAB6214 Analog Audio DA
Publication 81-9059-0631-0, Rev. A
July 2008
4-7
Advertisement
Table of Contents
