Table of Contents
Advertisement
3.2.2 I
M
NSTALL
AIN
Install main circuit board as follows:
1. Open front access door on the FRM-603 chassis frame.
2. Locate the empty card slot that mates to the rear connector panel installed in the previous step.
3. Align the top and bottom edges of the circuit board with the chassis card guides as shown in
Figure 3-2.
4. Hold the card ejector lever out (unlocked position) as shown when inserting the board.
5. Press the board into place to ensure solid connection with the mating connectors on the mid-plane
and rear connector panel.
Proprietary Information of QuStream
Figure 3-1 Installing Rear Connector Panel
C
B
IRCUIT
OARD
I
600 – AES600 F
NTEGRITY
Publication 81-9059-0632-0, Rev. A
AMILY
June 2008
3-3
Advertisement
Table of Contents
