Reset Values Menu Screen - QuStream AAB6214 Technical Manual

by pressing the touch-switch next to the Linking: On/Off menu item to toggle the linking function on
or off.
The Linking menu entry indicates the current active status of the signal linking function. When the
linking function is not active (off), the gain of each audio input signal may be independently adjusted as
required by rotating the control knob beneath the channel number display, as shown in Figure 4-1.
When Linking is set to On as shown in Figure 4-2, the audio channels are shown as being paired with a
single gain control. Gain for the linked pair may be adjusted as required by rotating the control knob
beneath the channel pair display. Balance between the two channels may be adjusted as required by
rotating the Balance control beneath the channel pair display.
Figure 4-2 Main Menu Screen Showing Linked Audio Channels
RESET
Pressing the touch-switch next to the Reset menu entry accesses the Reset Values Menu Screen,
discussed in Paragraph 4.3.
MORE
Pressing the touch-switch next to the More menu entry brings up screen 2 of the main menu, discussed
in Paragraph 4.4.
4.3 R V
ESET ALUES
The Reset Values Menu Screen, Figure 4-3, displays the current settings for each audio signal along the
bottom edge of the display screen. Resetting the values returns each setting to the factory default. Press
the touch-switch next to the YES menu entry to accept and execute the reset function. Select the NO
menu entry to retain the current set values and return to the main menu display.
Proprietary Information of Q
M S
ENU CREEN
S
U TREAM
Integrity 600 – AAB6214 Analog Audio DA
Publication 81-9059-0631-0, Rev. A
July 2008
4-2