Battery Replacement; Maintenance; Service And Replacement Parts - IDEAL 61-732 Instruction Manual

Measuring Resistance (Ohms):
• Verify the circuit is de-energized to obtain accurate measurements.
Verifying Continuity ( ):
• Verify the circuit is de-energized.
• The meter will sense the level of
resistance and beep if the resistance
is less than 25 Ω to confirm that
continuity is present.
Page 7
Closed Open
Circuit Circuit

Battery Replacement:

• Ensure test leads are disconnected from
circuit or components.
• Remove test leads from input jacks
on meter.
• Remove the two screws from the
battery cap.
• Remove the battery cap.
• Replace batteries with two
"AAA" batteries.
• Assemble the battery cap
to the meter and re-tighten
the screws.

Maintenance:

• Clean the case with a damp cloth and mild detergent. Do not use abrasives or
solvents.

Service and Replacement Parts:

This unit has no user-serviceable parts.
For replacement parts or to inquire about service information contact IDEAL
INDUSTRIES, INC. at 1-877-201-9005 or visit our website
www.testersandmeters.com.
Page 8