Advertisement
Quick Links
600 AAC Clamp Meter
Instruction Manual
CLAMP
CAT.III
61-746
Ω
40
A
600
NCV
HOLD
AC
DC
K
COM
#61-744
#61-746
600V
600A
V
V
OFF
True RMS
APO
M
Ω
m
V
A
V/Ω
CAT.III
600V
WARNING
Read First: Safety Information
Understand and follow operating instructions carefully. Use the meter only as
specified in this manual; otherwise, the protection provided by the meter may be
impaired.
WARNING
To avoid possible electric shock, personal injury or death, follow these
guidelines:
• Do not use if meter appears damaged. Visually inspect the meter to ensure
case is not cracked and back case is securely in place.
• Inspect and replace leads if insulation is damaged, metal is exposed, or probes
are cracked. Pay particular attention to the insulation surrounding the
connectors.
• Do not use meter if it operates abnormally as protection maybe impaired.
• Do not use during electrical storms or in wet weather.
• Do not use around explosive gas, dust, or vapor.
• Do not apply more than the rated voltage to the meter.
• Do not use without the battery and the back case properly installed.
• Remove the test leads from the circuit prior to removing battery cap.
• Do not attempt to repair this unit as it has no user-serviceable parts.
• Replace batteries as soon as low battery indicator
readings.
• Comply with local and national safety requirements, including the use of
appropriate personal protective equipment.
Visit us at www.TestEquipmentDepot.com
Page 2
Back to the Ideal 61-746 Product Info Page
appears to avoid false
+
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Advertisement
Related Manuals for IDEAL 61-744
Summary of Contents for IDEAL 61-744
- Page 1 • Comply with local and national safety requirements, including the use of appropriate personal protective equipment. Ω V/Ω CAT.III 99 Washington Street 600V Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com Page 2 Back to the Ideal 61-746 Product Info Page...
-
Page 2: Display Icons
• Electronic overload protection on all ranges Symbols on the Unit • Warning - read the instruction manual • 61-744 model is averaging sensing, rms calibrated • NCV - Non-Contact Voltage • 61-746 model is true rms sensing. • Cat III - 600V Safety category... - Page 3 OPERATION: Measuring AC Current (Amps): Non-contact voltage (NCV) With the NCV tab on the tip of the clamp close to an AC voltage, press the NCV but- ton. The NCV LED will light and the beeper will sound. The closer the NCV tab is to AC voltage, the louder the beep.
-
Page 4: Battery Replacement
CLAMP 600V CAT.III 600A • The meter will sense the level of resistance and beep if the resistance For replacement parts or to inquire about service information contact IDEAL 61-746 61-746 Ω Ω Ω is less than 25Ω to confirm that INDUSTRIES, INC. -
Page 5: Specifications
Display: 3-3/4 digit LCD with 4000 counts AC Converter: Polarity: Automatic, positive implied, negative (-) polarity indication. 61-744 model is averaging sensing, rms calibrated Overrange: "OL" indication is displayed. 61-746 model is true rms sensing. Measure Rate: Samples 2 times per second, nominal.