In-Call User Alert - Motorola APX 7500 O5 User Manual

If the call alert page is not acknowledged, a low tone sounds
and the display shows NO ACKNOWLEDGE.
7
The radio returns to the Home screen.
OR
Press the Menu Select button directly below OK to return o
the main screen for Contacts.
OR
Follow the procedure below.
> <
1
or to CALL.
2
Press the Menu Select button directly below CALL.
> <
3
or to select the required ID, press the PTT button to
initiate the call.
4
If the target radio does not respond after a preprogrammed
period of time, the display shows SEND PAGE?.
5
Press the Menu Select button directly below YES to send
the call alert page.
OR
Press the Menu Select button directly below NO to exit the
screen without sending the call alert page.
6
The display shows PAGING...<ALIAS>.
7
If the call alert page is sent successfully, a tone sounds and
the display shows ACK RECEIVED.
OR
If the call alert page is not acknowledged, a low tone sounds
and the display shows NO ACKNOWLEDGE.
8
The radio returns to the Home screen.
OR
Press the Menu Select button directly below OK to return o
the main screen for Contacts.

In-Call User Alert

You can enable and disable voice transmission, if needed.
Procedure:
1
Make sure you are in Home mode where the default zone
and mode are being displayed.
> <
2
or to scroll to the VMUT.
3
Press the Menu Select button directly below VMUT.
4
Press the Menu Select button directly below VMUT or the
VMut preprogrammed button again to turn the feature off
and you will be able to hear to normal dispatch calls.
Pressing the Menu Select button directly below
VMut programmed button momentarily toggles between Voice
VOICE MUTE ON
mute on and Voice mute off.
display indicates that the radio is muted to normal dispatch
calls.
VMUT
or the
shown on the
51
English